Curtain change short edge IKEA curtain ironing method

Curtain change short edge IKEA curtain ironing method
Ikea curtains are mostly 3 meters long, according to the height of their own curtain rod to shorten, move to a new home is recommended to change the curtain first, and then determine the position of the installation pole, so as not to shake the hand to change too long or too short!
I installed the pole first, and then changed the curtain, the result was a little short, a little hanging, fortunately not very serious, also endured……
From experience:
The first step to cut the curtain, you need to plan in advance how long the curtain, how wide the corners. I do need 240cm curtains with 5cm corners. I cut 50cm, and then double turn 5cm up, a total of 10cm as the corner of the edge, so that the end can get 240 curtains
The second step: roll the edge, cut the curtain began to roll the edge, for convenience, I directly took the cardboard in the curtain packaging and drew a line with the edge distance of 5 cm, as a contrast; You can use a paper clip to secure the rolled up area, and then press a rolled up edge with an iron
Step 3: Roll the second, repeat the above method, roll another 5 cm edge to go, and iron the rolled edge
Step 4: Put the adhesive Saumband on the place that needs to be glued, and then iron the outer cloth with an iron, and the inside will naturally bond as soon as there is a temperature. Be careful if it sticks, it won’t open again
Also:
As for the iron, I rarely use it myself, so I plan to buy a used one on ebay and find a brand new one
There is no iron board, I use a dining table, my house is glass, so I don’t know whether the wood can withstand the temperature of the iron. I put two sheets on, then a tablecloth to hold it in place, and then I ironed it directly on top, no problem.